Add an air conditioning installation on window to your home is a quick and easy way to keep the room cool during the days of high temperature. Install the air conditioner requires a window as sufficiently large and strong to hold the unit in place and a power outlet capable of supporting the electrical requirements of the unit. However, placing a unit in a window that is too large can cause difficulties to fit the air conditioner instead. Placement overcomes these problems with the installation of air conditioning extensions on the sides of the unit to provide the necessary seal between the unit and the edges of the window.

Instructions

1. Install the mounting structure, which is needed to sustain the air conditioning on your site, provided by the manufacturer of air conditioning. Larger units need external supports placed on the sill of the window to provide support as sufficiently broad to settle the unit. Adjust the brackets into place with screws to hold them on the outside of the window and out of the wall below the window. Smaller units rest on a bracket mounted on the sill, bar-shaped long supported through the sill, adjusted by screws. Follow the manufacturer’s instructions precisely to place the mounting structure relative to the panel of your window.
2. Open the window so that it is slightly larger than the air conditioning and then lift the unit on its place in the window. Get help to lift large units. Slide the air along the sill of the window until the unit fits over the mounting structure. The? Majority of the unit should hang outside the window.
3. Close the window on the air conditioner until the band window rests along the top.
4. Remove the extensions window at the side of the air conditioning unit. Into position should stretch, extending to the sides of the frame of the window. He claims his screwing extensions to the side and place frame window mobile. Screw the top of the side window permanently open to the upper band with an L bracket to prevent window falls into place. When extensions and the band are tight, the air conditioning should fit well in the large opening window.
5. Adds a line of caulking to the outside of the window along the edges of the air conditioner to isolate the opening window. Add more insulation inside the window by placing foam insulation on the side window is now open, where it meets the top panel of the window.

Tips and Warnings

• By adjusting the air conditioned place is better to have a helper holding the unit outside to prevent falls.