How to make your bathroom appear larger

Here are some tips for decorating a small bathroom bigger look. You do not need to expand the area of a bathroom to maximize space and make it appear larger. Just have in mind the following ideas (some of them are purely aesthetic, others require broader reforms), so then we will give you four recommendations to make your bathroom look bigger.

Illuminate well

Adequate lighting to eliminate dark corners. Create a false effect of focusing high indirect light low voltage to the passage ceiling. To permit more natural light we have today, that will make your bathroom look great; you can do it by installing a window instead of banners.

Reduce earthenware or replace a smaller

Replace the tub with a shower stall or remove a bulky dressing to put in its place, an elegant glass sink will give a lot of transparency and sense of space.

Clear physical and visual overload and avoid mixing a lot of materials

The key is the unity of colors and materials, choose a material like tiles and floor tiles for the walls or use tone uniformity in ceramic materials and if they have any design or pattern that is small-scale; Avoid frilly curtains or ornaments.

Use mirrors

Large mirrors cheat and make small spaces seem much larger. In a bathroom you can use large mirrors to make the walls appear to reflect natural light or windows.

How to make a wooden headboard for bed

Are you tired of seeing always the same as your bed? Like reading sitting on your bed and you cannot because you have a header which support your back? Want to give an original touch to your bedroom at a low price? Keep reading because we tell you how to make a wooden headboard for the bed.

Instructions

  1. The first step is to take measurements of the bed, you should measure the width and height you want to put the header. As for the width we recommend that you leave a few more inches on both sides of the bed and thus make the header sneaks on both sides of the bed. But if you have two bedside tables, you can make the width of the header go up behind them. This way you get your bed look bigger.
  2. The second step is to cut wood measures you want or buy it already measures as you want a carpenter or ask for help from a friend. Wood can be the way you want: rectangular, with waves, triangular, etc. leaves it to your imagination.
  3. Once you have the head to the desired shape, you have to paint the headboard filler. You have to apply one or two coats of primer and sanding once dry well on all sides.
  4. The next step is to paint according to your taste. You can paint the table of your favorite color or a color to match the bedroom where you will put the headboard. Another way is to paint the table or applying different patterns to your liking. You can also use various shades making a foamed or applying a patina to highlight the color. When you finish painting the table, let it dry.
  5. Finally the head, you have to apply a satin varnish to protect it all and let it dry.
  6. When you have the head dry and you can hang at the desired height above your bed.

You need

  • Wood
  • Meter
  • Pencil
  • Acrylic paint
  • Screws
  • Drill
  • Satin varnish

Advice

  • Please check uses TO acrylic paint because it is easier to fix if you mess up and is easy to apply.

How to fit a window air conditioner into a large window

Add an air conditioning installation on window to your home is a quick and easy way to keep the room cool during the days of high temperature. Install the air conditioner requires a window as sufficiently large and strong to hold the unit in place and a power outlet capable of supporting the electrical requirements of the unit. However, placing a unit in a window that is too large can cause difficulties to fit the air conditioner instead. Placement overcomes these problems with the installation of air conditioning extensions on the sides of the unit to provide the necessary seal between the unit and the edges of the window.

Instructions

  1. Install the mounting structure, which is needed to sustain the air conditioning on your site, provided by the manufacturer of air conditioning. Larger units need external supports placed on the sill of the window to provide support as sufficiently broad to settle the unit. Adjust the brackets into place with screws to hold them on the outside of the window and out of the wall below the window. Smaller units rest on a bracket mounted on the sill, bar-shaped long supported through the sill, adjusted by screws. Follow the manufacturer’s instructions precisely to place the mounting structure relative to the panel of your window.
  2. Open the window so that it is slightly larger than the air conditioning and then lift the unit on its place in the window. Get help to lift large units. Slide the air along the sill of the window until the unit fits over the mounting structure. The? Majority of the unit should hang outside the window.
  3. Close the window on the air conditioner until the band window rests along the top.
  4. Remove the extensions window at the side of the air conditioning unit. Into position should stretch, extending to the sides of the frame of the window. He claims his screwing extensions to the side and place frame window mobile. Screw the top of the side window permanently open to the upper band with an L bracket to prevent window falls into place. When extensions and the band are tight, the air conditioning should fit well in the large opening window.
  5. Adds a line of caulking to the outside of the window along the edges of the air conditioner to isolate the opening window. Add more insulation inside the window by placing foam insulation on the side window is now open, where it meets the top panel of the window.

Tips and Warnings

  • By adjusting the air conditioned place is better to have a helper holding the unit outside to prevent falls.

How to make a patina

The sheen is a semitransparent layer that is applied to a cabinet after finishing. The patina is a valid termination any wooden furniture or other material such as iron or forging process. Here we will use wood or whatever you prefer. If you want to know how it looks is done the following article, how to apply a patina.

  1. First of all the base preparation. If the piece is wood, sand the surface in the direction of the grain, remove dust and covered with 2 coats of white latex, leaving dry thoroughly between coats. If working , you should only remove the dust with a cloth and seal with 2 coats of white latex
  2. Then mix white latex with a hint of blue acrylic and applies overseas evenly. Let dry. Make the blue acrylic overseas and midnight blue, a little glaze. uses a brush bristle for each color and apply them by sector in irregular stripes, alternating tone to another, so that colors are well defined and do not mix with each other .
  3. While drying, firmly drag the paint to steel wool, always in the same direction. The sponge in its path, will removing paint, producing a delicate striped effect. Once dry work, protected with 3 coats of water-based varnish.

You need

  • cabinet or piece of wood
  • Two flat bristle brushes
  • extra fine sandpaper
  • acrylic: ultramarine blue, midnight blue
  • steel wool
  • water varnish
  • water
  • white latex

How to make a headboard for bed with a curtain rod

Thinking of bedroom furniture headboard think of the bed as it is a key piece in the bedroom because it is located on the main wall and attracts all eyes upon entering the room. There are many styles to the back of the bed where we can inspire us. We just need some art to get what you want: do headboard to bed with a curtain rod. Takes note of the following steps to take.

Instructions

  1. Take the dimensions of the width of the bed I want to put a header and go to the store to buy a loaf with those dimensions. You must pick a curtain rod wood or wrought iron that includes the auction ends to be more aesthetically appealing. Note that the tops of the bar will protrude slightly from the width of the bed.
  2. Once you have the bar, you should hang on her cushions. To hang need an tape the same color or one that aesthetically fits well with the pillows and the rest of the room.
  3. The measurements and the amount of cushion depend on the width of the bar, since they have to cover the entire width of the bar and also the height from the bar to the bed.
  4. You can put the bar at a height of about 60 or 70 inches above the bed, but to know the necessary height safely, you have to sit on the bed with his back against the wall and mark this point. Then take the subway and add about 5 or 10 centimeters more height you marked previously and make a new mark.
  5. Remove the cushions that you previously put on the bar for you is so easy to manipulate. When you have the empty bar, you can place it on the last mark you made ​​on the wall. To do this you must screw the rod supports.
  6. Finally hangs back cushions on the bar and you have the header list for your bed.

You need

  • A wrought iron curtain rod or wood
  • Screws
  • Neck straps cushions (2 tapes for each of the cushions)
  • 2 or 3 pillows (although the amount depends on the width of the bed)
  • Pencil
  • Meter

How to make a doghouse

Our pets also deserve to have a beautiful and comfortable home. For this reason, this time, we will show you, step by step, how to build a doghouse personalized and customized using appropriate materials to remain outdoors.

Do not miss the step by step to create the house of your pet.

Tools

  • Circular saw
  • Wood Disc
  • Cordless drill
  • PZ2
  • Keyhole saw
  • Leaf pair curved cuts in wood
  • medium grit sandpaper
  • Short nap roller
  • Tray
  • Hot air stripper
  • Silicone applicator gun

Materials

  • 18 mm OSB
  • Mounting adhesive
  • Washers 4 X 40 mm
  • Sealant primer
  • Plastic paint
  • wood
  • Door stops

To use a structure performing OSB, that is, oriented strand; a strong and durable material, which is widely used in construction. To join the pieces together will use mounting adhesive and screws. Regarding the finish, apply a plastic paint booth and ceiling.

Step by step to see how to make a doghouse

Step 1

First, mark and cut the pieces that we will need to create the structure of the building. To make this work, use the jigsaw, which adjust the slider at 45 and sheet wood.

Step 2

When cutting the pieces that form the roof, will post again saw the skate horizontal.

Step 3

Next we prepare a template is shaped head of a dog and attach the piece to be in the front of the house, with tape. Then we retired and drawing paper.

Step 4

With the scroll saw and a special blade for curved cuts in wood, we shape the input.

Step 5

We then review the cutting zones with a piece of medium grit sandpaper, to remove any burrs. We removed the powder produced with a cloth or paper.

Step 6

We apply mounting adhesive on the edges of the pieces and assemble the building. We will strengthen the fasteners with a coach.

Step 7

It is the turn of the finish. We protect your hands with gloves and apply a latex primer sealer around the outside of the building. We cut areas of difficult access, with the help of a first pallet; in the rest of the work surface with short nap roller.

Step 8

After drying time which indicates the manufacturer, we paint, in this case green, following the same procedure. It is important that you use a product that supports good moisture and temperature changes.

Step 9

When the paint has dried, finish the job by covering the roof with American roof. We will post the different parts, with the same adhesive that we used when piecing OSB.

Step 10

And this is the result! A cheerful and original house, which we have given a very personal touch, thanks in part to the input waveform.

How to make a footrest

In decorating, an increasingly important element is the footrest. It can be placed in the bedroom or in the living room, because besides being a decorative element is functional and helps us to break. However, sometimes their prices soar, so today we show you the steps to make a footrest.

WHAT YOU NEED TO KNOW…

  • Fabric:  we can choose the ones you like and design our own footstool.
  • Size:  as a rule, the size of the footrest should look similar to the front seat to be placed wide.
  • Simple:  in a few steps, quickly and, above all, with little money, we will have a nice footrest.

If you have always given us good the crafts not take long to prepare our footstool, because just follow five simple steps.

Items needed to make a footrest

  • A wooden board 10 mm thick
  • Drill
  • 4 wooden legs
  • Whitetail
  • Foam
  • Wadding
  • Fabric
  • Staples

How to do it

The first thing you have to do is cut the board with dimensions of approximately 40 x 35 cm. We’ll take the drill and make four holes in the four corners and then put threads on the legs at a distance of 4 cm from each edge approximate.

We will place the legs into the holes we had done previously on the board and put a little white glue these to better set and not move.

Then paste a piece of foam to the same size as the board with white glue. Ultimate line for the foam and the board surface to stick well. When we smeared tail will push both elements to come together in the right way and let dry about an hour.

We will cut the batting with a similar foam and the board width. Its length should be the length of the foam higher, leaving a few inches of slack so that we can then staple it to the board. We will post the batting with clips on the ends of the width.

We will cover all the material and begin to fix it straight along, especially if the fabric has a pattern of stripes. Finally, width and footrests are ready for us to use in the classroom or in our bedroom.

How to make a cellar at home

If you like wine, you surely have ever thought about starting a small winery at home ; and not only to have wine at any time, but also to buy wine for the best price: you can buy fresh out without having finished their aging and then let home reach its best when its market value has multiplied. But domestic installations have their drawbacks: it is difficult to find a suitable space, and emergency solutions do nothing to spoil the wine that so carefully and interest is preserved. A good Rioja wine, as Conte 2005 Domain can improve for many years and revalued if well preserved, while the reverse only get very expensive vinegar. So if you want to learn how to make a wine cellar at home, we recommend that you consider the following points:

Instructions

  1. 1.       Only better wines which have been produced considering aging, so it will not help save a young wine for years in a good cellar, however good as almost certain that when it comes to drinking it will have spoiled. The best wines to save are the reserve and gran reserve, which have matured some time in wooden barrels and cylinder enough to continue to evolve after the individual wineries.
  2. 2.       It is essential to maintain a constant temperature of 8 ° C to 18 ° C, ideally average of 12 ° C throughout the year. If the temperature is higher, the white wines undergo secondary fermentation and red rust. Conversely, temperatures below cloud the wine and alter the color. Have a thermometer handy to have the controlled temperature is key.

3.       Maintain the ideal humidity is essential: not only does not harm the proper storage of wine, but necessary; but should not be excessive, because otherwise facilitate the development of mold and wines acquire unpleasant aroma moisture. In turn, it should not drop below 80% because the dryness affects corks, which shrink and let in the air.

4.       We must also take care of the noise: although the wine does not “hear” the noise and vibration noise hurt your homemade wine, because it stirred and alteration of their qualities. The racks should be, if possible, isolated from the fridge or any device with motor. Not have to perform heavy labor that produce noise or vibration in the room to serve as a winery.

5.       Odors also penetrate the bottles; not hold the wine together with materials such as paint or gasoline; or near food with strong flavors, such as cheese or ham.

6.       The ventilation is another aspect to take care of, so that the air is renewed. It is advisable to have a ventilation system, if possible without engines, so there is no vibration as we mentioned.

7.       Place the bottles horizontally: the wine must be horizontal so that the cork is always in contact with the wine; you can stack the bottles, provided there is no move to find many that we are looking for. Get a book warehouse to order bottles and find them easily.

8.       Light is the enemy of wine: the wine is spoiled enough time if exposed to light; the cellar should be very thin, because if an oxidation will occur to those skilled then recognized as “light flavor”.

9.       If you want to put your bottles neatly, look at how to make a bottle with corrugated fiber cement sheets and to help you capitalize on your bottles, do not miss how to do a wine pairing.

10.   To read more articles like how to make a wine cellar at home, we recommend that you enter in our category of build and design things from home.

Advice

  • If you have to work to put a hold, finish them before you start placing your bottles
  • A wine cabinet is a cheaper option to start: if then do wines at home, you always have ready to serve wines from more rotation.

How to lubricate bearings dryer drum

The bearings of the engine in clothes dryer require regular maintenance to ensure easy rotation during the drying cycle. You must inspect the bearings every time you observe a squeaking or scraping when the dryer is running. Grease the bearings and replace those that are damaged during each inspection. You can have your dryer maintained by a professional appliance repairman or you can inspect and grease the bearings yourself to save time and money.

Instructions

  1. The dryer away from the wall and unplug the power cord from the wall outlet. Remove the top panel of the dryer to access the inside of the dryer cabinet. The process to remove the top panel varies depending on the specific dryer. Check your own dryer for concrete to remove the top panel of the main unit measures your manual. Some common measures include removing the panel make a lever on the front panel of the dryer cabinet with a flat screwdriver or putty knife. Lift the top panel out of the dryer in the up position to gain access to the inside of the dryer cabinet.
  2. Remove the screws from the front panel of the dryer with a screwdriver or socket and the appropriate drive. Disconnect the wiring harness from the door switch located on the top of the front panel. The control switch is located on the left side or the right of the dryer cabinet, depending on the brand or model of your dryer. Dryers have a front control panel require disconnect wiring control panel and take off the screws holding the panel in place.
  3. Lift the front panel so that the bottom clip of the dryer cabinet separate panel, and pull the front panel away from the dryer cabinet. Place the front panel aside.
  4. Locate shaft assembly motor and pulley on the drum of the dryer. The set is on the left side or the right of the dryer drum, depending on the specific model of your dryer.
  5. Press the pulley to the drum to relieve tension belt dryer. Remove the belt tensioner pulley and shaft engine.
  6. Grab the top of the dryer drum and pull it out of the dryer cabinet. Place dryer drum aside.
  7. Locate shaft bearing motor in the bottom of the dryer cabinet. Inspect the bearing to see if faulty and change it if it is damaged.
  8. Applied two drops of lubricating oil to the front and rear shaft bearing of the motor. Spin the shaft of the motor with your fingers for the oil to seep into the inside of the bearing. Grab the drum of the dryer and put it back into the dryer cabinet and the rear guide wheels.
  9. Push the block into the dryer drum and connects the strap around the shaft of the motor and idler pulley. Release the tension pulley to return to the dryer belt.
  10. Replace the front panel in the dryer cabinet and screw the screws to hold the panel in place. Connect the wiring harness door switch in the top of the front panel. Replace the control panel if the control panel of your model is in the front of the dryer cabinet. Connect the wiring harness control panel and screw the screws to hold it in place.
  11. Returns the top panel on the dryer cabinet and press the front corners of the panel to secure it. Plug the power cord from the dryer to the wall outlet and slide the dryer in place against the wall.

How to light a kitchen

The kitchen is one of the areas of our home where lighting becomes more important because it is a place where you perform tasks that require light to be done correctly and safely. Not only is a decorative issue but the lighting in the kitchen should be functional and practical. Combine the natural light in our kitchen with artificial light that allows us to prepare and cook our food in a calm and pleasant manner. Also, often the kitchen is also a place to eat or perform other activities, so adapt the lighting depending on the use we give to this space. Lest you have questions about how to do it in unComo.com you some tips on c ow illuminate a kitchen.

Instructions

  • First, note that we make the most of natural light from our window that is, entering through the doors and windows. This will be the key provision of furniture, as well as the installation of curtains and blinds that do not impede the passage of the sun.
  • As for the artificial light to properly illuminate your kitchen, we recommend combining light overall, which will allow us to move you smoothly-with point lights in work areas (food preparation, cooking area dining-office ….) You can see here the different types of lighting to choose from.
  • The fluorescents are one of the best options for general lighting because they produce more light at a lower cost and, therefore, you will save on your electricity bill. They also provide a white light that is very suitable for food preparation and cooking time.
  • To illuminate certain areas, we can choose bulbs, which provide great flexibility because they can be easily installed anywhere in the kitchen.
  • It is essential not to make the mistake of installing a single light in the center of the kitchen, because shadows will be generated in the work areas. This way, you will avoid the risk of accidents such as cuts and falls due to poor lighting.
  • Thus, very useful the recessed lights in closets and cabinets, they do not bother to look at and provide clarity to the work surface such as marble or countertop. The optimal distance to place will be around 50 or 60 cm from the top.
  • We also prove very helpful lamps built into the hood to ensure lighting while cooking.