Clean carpets dry is a method of cleaning using a dry powder and solvent to remove dirt and grime. The dry cleaning methods are ideal for people who need a quick cleaning and do not have time to wait for the carpet to dry.

Application

The dry cleaning solvents use a combination of water, detergents and cleaning solvents, according to the site web Bane-Cline Corporation. The process of cleaning carpets dry stirring the dry powder on the soiled area begins.

Brush

Using a brushing machine to work deep cleaning solvent in the carpet fibers, during this step, the agitation of the carpet fibers loosen the dirt, which is absorbed by the dust cleaner. Let the dust settle on the carpet for at least 15 minutes before moving to the cleaning step, the website recommends Allergy Consumer Review.

Cleanliness

The best way to clean the powder substance and loose debris is to use a standard household vacuum.

Caveat

Using too much dry cleaning solvent can reduce indoor air quality. If dust appears on shoes or pants cuffs too much powder. Vacuuming on the area before continuing the cleaning process

Painting on plaster or composite boards without sanding or priming properly result in irregular patches on the surface or opaque spots where the paint is not mixed properly. Use the type of paint wrong basis can even cause bright spots on the paint finish. The same applies to the exterior plaster.

When using plaster

Gypsum (gypsum plaster) is one of several types of fillers. Others include joint compound or drywall, caulking, patching stucco and masonry and plaster of Paris. The plaster comes in a variety of ways. The lightweight gypsum is commonly used for interiors. It dries quickly, is not compressed and sands easily. The stress cracks or joints that expand and contract are best to fill them with a flexible elastomeric plaster. The vinyl plaster can be used outdoors and trim coating. All plasters are designed only for minor repairs and narrow crevices. Use the plaster properly will ensure a lasting repair.

Paint on interior plaster

If the repair is cast on a smooth surface you need to be sanded very flush so there are no ridges. Feel the rough to pass your hand over the repair. If the patch is in a plaster textured wall, no need to sand at all. Because the plaster patch is more porous than the surrounding surface, you have to be prepared before top coating; otherwise it will look like a dull point. No need to use a special primer; any water-based paint for general purpose or drywall will. Use any paint you would use to finish the job.

Let it dry for about four hours before repainting. Avoid using primer to remove the stain of the patch. These are very dense and can make the place less absorbent than the surrounding wall. Instead of being a dull point, you can end up with a bright point. To achieve a final blend for a touch, use the same method of application used for the original surface. In other words, use a roller to paint a wall or a brush to the door that has been painted. Paint retouching extends beyond the edges of the patched site and slightly lowers the edges and mixed thoroughly.

Painting on exterior plaster

Because the outdoors is subject to direct sunlight and extreme temperature and humidity, the materials used to patch and paint the exterior of the home need to be more flexible and weatherproof. A common mistake that people make when using outside is neglecting plaster primer bare wood before plaster. The bare wood is moisture absorbent and filter from the patch, causing it to dry and crack. Place the wood primer, let dry and then apply the plaster. To paint on exterior plaster, use two coats of finish paint, leaving four hours of drying time between coats.

For many of us, the August vacation just started and we still have plenty of time to enjoy the summer season. By now you will be bored with the design of your terrace and surely you miss some pieces of furniture or additional elements that would help you to enjoy the most of this outdoor space.

Because there is no better time than this to set the terrace or, failing that, the balcony, here are five ideas to help you enjoy the most of an outdoor summer.

Forget about folding chairs

It is true that these chairs are very practical, but the truth is that comfortable have little. If you have enough space choose a spacious and nice sofa. Keep in mind that when dealing with outdoor furniture will be exposed to inclement weather. To keep them in good condition longer, choose rattan furniture or synthetic fibers. If you prefer wood, teak is a great choice. Choose simple remove and put cushions, which can be washed easily.

The importance of a good shadow

In these summer dates, the sun becomes almost an opponent and until it loses force it is impossible to spend much time under its rays if we do not have a good shadow. If you want your terrace to be an ideal space for any time of day, prepare a corner in which to protect you from the sun. Choose from pergolas, awnings or umbrellas, sure to find the right design for your terrace.

Light is the key

During the night these spaces can be really magical, everything will depend on the lighting. In addition, taking care of the appearance of the terrace throughout the day will be able to take advantage of the space to the maximum. If you have problems with the lighting network, choose solar lamps that will also reduce your electric bill.

The green component

If we want to create a perfect outer space we cannot miss the plants. Choose flowers, shrubs, aromatic plants or even trees, but make sure you do not miss your terrace if you do not want to risk your oasis staying in the desert. In addition, plants clean the air and help cool the environment.

Small spaces

When the space is reduced we must squeeze our ingenuity thoroughly to decorate it properly. Luckily, it is becoming easier to design a complete balcony for very small that it is, there are even dwarf barbecues for confined spaces.

Install a fence is a good way to prevent pets from escaping the garden and have a safe area where children can play. A privacy fence will increase the value of your property and provide security further. Within days, any man skilled in traditional projects “do it yourself” can install a wooden privacy fence along the perimeter of the garden.

Instructions

1. Consultation of utilities and requests to mark underground facilities around your property, this allows you to visualize the place where the supply lines so you do not bump into them when making the holes for the posts.
2. Place a wooden post at each corner of the fence. Tight rope stretched between these poles. With a tape measure, mark the location of the posts should be spaced 8 feet (2.4 m) on center.
3. Inserted with a hammer every corner posts of the fence, tight rope stretched between these poles.
4. Rents a gas driller to make holes in the ground that correspond to the posts at a depth of 36 inches (90 cm)
5. Place a pressure-treated 4 x 4 x 8 feet (1.2 x 1.2 x 2.4 m) on each corner post. Pouring cement into the post hole, Tamp the cement once you consider that the post is straight and plumb, Add water around the post, the concrete will absorb and pole will be installed. Use a level of 4 ft. (1.2 m) to make sure the post is plumb.
6. Tie a string between the outside of each post. This will provide a guideline for placing the remaining poles and ensure proper installation of the fence.
7. Set three tables of 2 x 4 x 8 (0.6 x 1.2 x 2.4 m) between the posts. Place a 9 inch (22 cm) from the floor and another on top, added another in the center of both tables. Use a level of 4 ft. (1.2 m) to ensure that they are level and screw them to the posts 4 x 4 ft. (1.2 x 1.2 m). For this step you’ll need an electric screwdriver and wood screws 3 inches (7.5 cm) for outdoor use.
8. Install a stake in each corner of the fence. Place a screw on top of all the pins. Stretch a string tightly between the screws. This will serve as a guide to determine the height of the stakes.
9. Screw the stakes tables 2 x 4 feet (0.6 x 1.2 m) with two wood screws 2 inches (5 cm) for outdoor use per table. Set screws 3/4 inches (2 cm) to prevent lateral slipping off. Leave a gap of 1/8 inch (0.3 cm) between the stakes to allow for expansion and contraction of the same. If necessary, cut the stakes to the desired height with a miter saw.
10. Check that the wooden stakes are plumb by using a carpenter level 4 feet (1.2 m).

Tips & Warnings

• Apply a finish to good quality exterior wood to protect the fence. This will provide greater duration.
• Use safety goggles when using power tools.

The floor of the bathroom gets wet. This usually means that the basis and the subfloor will also be wet. The flat also has to bear the weight of the tub, shower, tiles and other accessories. The tiles are particularly heavy panels with layers of cement, mortar, tile or stone and grout. Use the correct type of plywood ensures a durable floor.

Tongue and groove

Plywood tongue and groove is made specifically for subfloors. The underlayment rests directly on the floor joists and is the lowest layer of soil material. Plywood of 3/4 inch (1.90 cm) thick is the most common and stronger. The 5/8 inch (1.58 cm) thick is also available, but space restricts the use of joists and floor termination rates. The material plywood subfloor tongue and groove interval is classified for use on floors, and provides the necessary support for heavy soils bathrooms and bathtubs full of water.

Plywood paneling

The second layer of soil is the basis. Plywood paneling adds strength to a ground, raised or provides a gripping surface for a finished floor. The plywood used for coating is from 1/8 inch (0.31 cm) to 1/2 inch (1.27 cm), depending upon the requirement or necessity. Most manufacturers require flat ceramic tiles of at least one inch (2.54 cm) thick or not guarantee installation. The deviation in an apartment of less than one inch (2.54 cm) thick makes the tile cracks or loose mortar. The bathrooms require some type of coating in most installations.

Luan plywood

Luan plywood is a special type of hard plywood made outdoor or moisture resistant glue. It is made from the wood of the tree Lain of the Philippines. The floor covering installers Luan added to increase height and provide a smooth surface for different types of vinyl flooring. The installer staple Luan plywood 1/4 inch (0.6 cm) thick at the base or subfloor, Mortars and glues adhere to plywood, which is suitable for facilities and vinyl tiles.

Oriented strand board

A product similar to wood plywood called oriented strand board provides the same resistance when used as underlayment material tongue and groove. It has the same rating plywood extension a tongue and groove. The product is manufactured from thin strands or wood chips that are glued and pressed together to form a table. Oriented strand boards are becoming more common, as recycled wood residues and are cheaper.

The way you paint your bathroom is similar to the way you paint any room. Apply a coat of primer, covering the corners with a brush and a roller used to cover the rest of the wall. What is different is that to paint baths is used another type of paint. The functionality of the painting is more important here than in any other room, so you need a durable paint, water-resistant and inhibits the growth of mold and mildew.

Latex enamel

In many cases, latex enamel will be enough for the bathroom walls and the shower. Choose a glossy or semi-gloss rather than a flat or peeling paint; the brighter, more will reject the water. Also make sure you print the walls before painting, to seal the wall and provide additional protection against moisture, mold and peeling.

Oil-based enamel

Oil-based paints are also effective to paint the walls of your shower, but are more difficult to handle than the latex paints. Naturally better repel water, but it takes longer to dry and produce a great smell; so you need to work in a ventilated area. To clean you need to use solvents and paint thinner instead of water needed to clean the latex paint. Also, when you should paint again, you must use oil-based paint again because the latex does not stick to oil.

Special paint for bathrooms

Paint manufacturers also produce a paint specifically designed for use in bathrooms. These paintings include chemicals that kill fungi and mildew and helps prevent their growth. This is especially useful in poorly ventilated bathrooms, but usually is not necessary if you have a strong fan and keep the bathroom door open after bathing.

Paint your shower surround

You might want to paint the fiberglass that surrounds your shower. This can be done with any painting mentioned above while you follow the correct steps to prepare the surface. First, sand the fiberglass with extra fine grain sandpaper. You just bring out the shine and give the painting a place to hang. Second, this envelope cleans fiber cleaner to remove excess dirt. Third, rinse with water and let it dry. When you are ready to apply the paint using a spray to avoid the appearance of brush strokes and a smooth finish, you can use a pair of latex paint cans of spray paint or spray to obtain a long-term outcome.

Apply a sealer to floor the bathroom can have several advantages. Sealants can help increase the slip resistance of floor tiles, which can help make sure the bathrooms. Sealers also help prevent the tiles and grout staining, making them easier to maintain. Many types of sealants are now in the market. Choose one based on the amount of wear that suffer the floor and what type of tiles are installed.

Grout sealer

The slurry is made of Portland cement mixed with sand and sometimes pigments. The cement is porous and can absorb moisture. Protects grout impregnation with a sealant. Avoid using topical sealer on the grout; a topical sealer will not prevent grout stains but will give a bright and remarkable finish.

Stone floor sealants

Seal the bathroom a floor made of stone with a silicone impregnation sealant for porous tiles and formatted. Sharp and polished stones can be sealed all at once with the slurry using the same sealant. The fallen stones and slate tiles may benefit from a second sealant to deepen the color of them. This sealant is applied topically after impregnation sealant; avoids penetrating grout joints to avoid giving a shiny appearance.

Sealants porcelain

The glazed porcelain and ceramic tiles are not porous and do not require sealing to protect them from moisture. Both products, however, can be slippery when wet. Sealants impregnation applied to the surface, is allowed to dry for 10 minutes and then cleaned and increase the sliding resistance of these tiles. In addition, some polished porcelain and ceramic tiles with texture can be sealed prior to grouting to help release it, which will make it easier to clean and help remove grout haze.

Terracotta floor tiles

The unglazed terracotta tiles and Saltillo tile with red clay bodies and should always be sealed, especially in humid areas. To leave only the color of the tile and not change its finish, use a sealer impregnation. To leave only the color, but create a glossy finish, use a floor sealant urethane. To deepen the color of the tiles, mixing linseed oil with paint thinner and apply it to four layers on the tiles. Sealants should be applied in at least two layers for maximum protection of the tiles.

When you choose a material for the floor of the kitchen, there are several qualities you should consider. The floor bath should be resistant to water and stains, durable and easy to clean. You should also consider combining the aesthetics you want to create in your bathroom. Concrete, stone tiles and pottery are some of the best materials for the bathroom floor which are strong and resistant to stains. Cork is also a good alternative if you want to have a wooden floor or a floor feel softer underfoot.

Concrete

Concrete is one of the best options for the bathroom floor, particularly for builders and decorators seeking a contemporary look in the bathroom. Concrete is available in tiles or like materials for pouring. Concrete sealed properly is incredibly strong and resistant to stains, water, growth of bacteria and allergens. Concrete can be stained to match different decors. There are concrete floor options for many different budgets and it works well with radiant heat systems and radiant floors.

Stone tile

An elegant for the bathroom floor option that has many of the same qualities of concrete is stone tile. When installed and sealed properly, it is as strong as waterproof. The granite stone tile is particularly durable and will not scratch or splinter easily as ceramic tile. Other stone tile options, such as marble, limestone or travertine are not as durable as granite but are, however, good choices for the bathroom floor.

Ceramic tile

Ceramic tile provides you with many of the qualities of concrete and stone tiles are more colorful and decorative options, which include the creation of mosaics. The cost of installing ceramic tile is less than the stone or concrete and is relatively easier to clean and maintain. A disadvantage is that ceramic tile can be scratched or chipped, so ordering extra tiles to replace them easily. Ceramic tiles can be slippery and requires special sealing grout to make cleaning easy.

Cork

Unlike other wood floors, cork is a material that is ecological floor surprisingly useful for the bathrooms. Available in different veins and designs, cork can add a natural look to the bathroom decor. Although less water resistant than concrete, stone and ceramics, has natural properties against microbes and when cared for properly, suffer few problems related to water damage. Cork is softer and warmer than the concrete, stone and ceramics and is much less slippery, besides being a natural insulator and absorbs sound.

A bedroom should be a place of relaxation. Choosing a striking paint can make a big impact on the look of a room and how you feel in it. But before taking the brush, look which are the colors of relaxing paint that invoke a sense of tranquility and ensure a peaceful sleep at night.

Blue

More than any other color, blue can relax the senses. But not just any tone. To get the best rest, choose pastel colors like blue for painting instead of choosing bright colors like cornflower blue or aqua to the walls of your bedroom.

Green

The color of spring, green, can be relaxing and cool at the same time, which makes it an ideal choice for the bedroom paint. Choose fresh pastel colors instead of the rich and flashy to get a feeling of peace tones.

Yellow

Yellow is said to be striking and sunny instead of relaxing, but the right shade of yellow can give a calming effect. Consider a warm honey tone or soft butter yellow to enhance the relaxation factor bedroom.

Purple

It is known that the essence of lavender induces sleep, but so does the color. The muted tones of purple, lavender as both lilacs, are ideal for a bedroom.

Neutral

The neutral warm colors can help create a cozy feeling. Whether you opt for a beige colored paint (also called beige) color as land, remember to sleep well choose subtle shades. You can use white, but choose a tone like eggshells to keep a calm.

It is a fact of life the carpets are dirty. They also have stains and odor. Fortunately, you probably have all the ingredients to clean and fresher your carpet in your closets and you can do it for less money than it costs to buy or rent commercial products shampoo machine.

Vacuuming

It may seem obvious, but the easiest way to keep your carpet clean and fresh is suck. A common aspiration keeps your carpets looking their best by removing dirt, restoring the eider and preventing dirt from penetrating the fibers of the carpet. To get the most out of your vacuum cleaner and the time that you use, follow these tips. Cups clean dust or vacuum bags according to the manufacturer’s instructions. Remove the hair, strings or other debris that remain shrouded in brush beater cutting them with a scissors or knife. Aspire high traffic areas more frequently and consider protecting with runners or carpets.

Refresh

Your vacuum cleaner can also be a weapon against a carpet smells, if the source is a 10 year old or a cat 10 years old. Only baking powder shakes freely on your carpet. Let sit for as long as possible; the longer baking powder remains on the carpet, the better the ability to absorb odors. Then vacuuming, not only will your carpet smelling fresh, so will your vacuum cleaner!

Stain removal

Removing stains from the carpet is easy with some essential household items. Before discussing these, remember to always test on an inconspicuous to make sure the carpet is not damaged area. Isopropyl alcohol removes ink stains or markers. Just spray it and then dry (do not rub) with a clean white cloth and repeat until the stain is gone. The bubbling action of the Club makes foam stains such as coffee, tea, wine and soft drinks. First erase the liquid with a cloth and then pour sparkling water on the stain while it’s still fresh. Dry (do not rub) with a clean white cloth and repeat if necessary. White vinegar is especially effective for cleaning and deodorizing pet accidents. The baking soda will absorb grease stains on carpets.