The table of a carpenter can provide a convenient place to handle tasks such as cutting, gluing and perforation. It can also provide space for you to design projects without using the kitchen table or without working on the floor. This table should be durable to withstand the heavy wood and equipment such as drills and saws. Although you can buy a table for your carpentry workshop, building for yourself can be a successful project.

Instructions

1. Determines the height, width and depth you want for the carpenter table. The top of the table should have the waist, and must be large enough to accommodate your most ambitious woodworking projects.
2. Measure with a tape measure two sections of wooden 2 by 4 inches (5 to 10 cm) to the length of the table, and two additional sections for depth, Sections cut to length with a circular saw. Ingle tea the ends of these sections 45 degree angle with a saw.
3. Monte sections of width and depth to form a rectangle. Drill two pilot holes in each corner – the holes should be less than 1/16 inch (0.16 cm) diameter of wood screws. Insert a wooden screw 4 inches (10 cm) in each pilot hole and tighten them with an electric screwdriver.
4. Measure the inside depth of the rectangle. Transfer this measurement to the wooden sections 2 by 4 inches (5 to 10 cm) and cut them to size with a circular saw. You will have a section for every 12 inches (30.5 cm) length of the table – these sections provide additional support for her.
5. Place the inner support sections between sections of length of the upper structure of the table at intervals of 12 inches (30.5 cm). Drill pilot holes through the length sections at the ends of the supports and attach them with wood screws 4 inches (10 cm).
6. Place the frame on top of a sheet of plywood 5/8 inch (1.6 cm). Brand frame dimensions of plywood with a pencil. Short said the size of the wood structure with a table saw. Repeat this process with a second sheet of plywood 5/8 inch (1.6 cm).
7. Measure and cut four sections of 4 by 4 inches (10 by 10 cm) of wood about 5 inches (12.7 cm) shorter than the final height of the table Carpenter to form the legs of the same. Turn the frame on its edge, place the end of a leg against the corner of the frame, drill pilot holes through the frame at the end of the leg and insert wood screws 6 inches (15 cm) to secure the leg to the bottom of the table structure. Repeat this process for the remaining three legs.
8. Place the table upright. Place a sheet of plywood on top of the upper frame of the table and aligns the edges thereof with the frame. Make pilot holes at intervals of 4 inches (10 cm) through the wood in the frame and brackets. Insert and tighten the wood screws 4 inches (10 cm) to secure it to the frame.
9. Apply wood glue to the top of the sheet of plywood. Turn the table upside down and place it on the second sheet. Align the edges of the plywood sheets. Let the glue dry for an hour before turning the table again.

Tips & Warnings

• Ensures with metal brackets L-shaped each table leg and the bottom of the upper part of the table if you plan to use it to support very heavy objects
• Use leather work gloves and goggles resistant to breakage protection during cutting and building your carpenter table to avoid injury.

Some master bedrooms have windows in front of the only place where logically makes sense to put a bed. In most cases, this is not problematic, and light naturally is welcome to the room. However, certain things you need to consider when designing a bedroom where your windows are behind the bed to make sure the room is visual sense and work properly.

Instructions

1. Use drapery from floor to ceiling behind your bed to give the room a feeling and a stylish look. The floor to ceiling drapery can also make the room seem larger, and not have to have floor-to-ceiling use. For a more contemporary look select pleated drapery for a more traditional feel
2. Use stockings hanging curtains or blinds for a more rustic look in your bedroom the middle curtains and blinds work best in a large room not as they help visually expand it. For a more contemporary look, use Roman shades or vertical blinds made ​​of modern materials such as metal.
3. Avoid putting tables that are too deep next to the bed in front of your windows. They make it difficult to open and close windows as the weather permits.
4. Keep objects such as lamps and vases with fresh flowers or silk low to keep out of the way of the windows. There are both functional and aesthetic reasons for this. You can easily pull and break the items when opening and closing the curtains, and whether the items are too high, they will be out of place in front of the window treatments.
5. Center bed under the window as much as you can. If the bed is the first thing you see upon entering the room, put the bed outside the bedroom will make the decor look crooked and centered. Even if your windows are a little off-center, focus your bed facing the windows will look better.

Tips & Warnings

• If your windows are a bit off-center and are using curtains, extend the physical support of the curtains and take a bit out of each side window to give the illusion of a properly centered window. That way you can focus your bed against the wall.

There are universal lines that follow when designing a bathroom toilet with access for the disabled. These guidelines suggest the height of the toilets, sinks, showers, switches and the amount of space it takes to maneuver a wheelchair wheels. The guide Americans with Disabilities Act of 1990 can be found in www.access-board.gov. Many products are available to make a bathroom with disabled access and can be stylish and functional.

Instructions

1. Make a list of your needs and desires. Check magazines and cut out pictures of objects you want to include a bathroom with disabled access. Visit websites that offer access products. Choose objects you want to use in your bathroom and print images of objects and leaves with product information.
2. Create a folder to store your ideas and images. Use tabs to divide separating products such as shower, vanity unit, floor, a toilet and accessories. Post pictures and product information sheets in the folder.
3. Draw a plan of the bathroom on the graph paper. Draw the location of the bathtub or shower, a toilet, a sink and vanity. Keep a minimum free floor space of 30 by 48 inches to accommodate a wheelchair. A wheelchair will need a space of at least 60 inches in diameter to make a 360 degree turn. It allows sufficient space to maneuver the wheelchair with freedom in the bathroom.
4. Plan a space for the door is at least 32 inches wide, but preferably 36 inches. Choose a sliding door to allow more space in the bathroom.
5. Design the space Sink the bottom, to allow the wheelchair fit under it. Leave 30 to 34 inches of clearance under the sink. Use water lever-type keys. Put bars for towels to a “reachable distance” to someone sitting.
6. Plan a bath or shower to which you can enter on foot. Design a shower seat or leave room for you to use a wheelchair in the shower.
7. Mirrors designed so that they can tilt, so that you can see while seated.

Tips & Warnings

• Follows the guidelines set forth by the Americans with Disabilities Act of 1990.
• Plan reinforced wooden walls to install handrails.
• Make everything achievable while sitting.
• Plan a toilet about 18 inches tall.
• Select lever-style door handles.

When decorating a master bedroom one of the first decisions you must make is the finish of the walls. The color, the design and texture you choose will generate an important aspect in the overall impact of the room and you can use these elements to create a style specific in space. There are several options for decorating the walls of a master bedroom, so you must take into account factors such as the budget, the style you want and the labor required before deciding your final choice.

Painting

Painting, as it is available in a variety of colors and finishes, it is an economical option to renew the look of your walls effortlessly. The paint color you choose for the bedroom should be relaxing, with colors like blue, green, lilac, peach or beige. For a small room choose a light shade to make the space look larger. However, if the bedroom is large you can choose more saturated shades of colors above. You can also texturing techniques painted faux finishes painting walls with sponges or rags, so they look as if they were made of stone, marble, leather or other materials. If you prefer a pattern, use templates to apply decorative designs or a frieze on the top or bottom of the walls.

Papering

Often the wallpaper is used to cover the walls of a bedroom, but the application is more laborious than applying paint and cannot easily change the finish. However, the wallpaper is available in a wide range of colors and designs, so you can completely change the look of a room. Some of these papers are textured and can generate an interesting aspect to the bedroom. If you do not want to paper the walls of the room all covers only the wall behind the bed with a print paper so it will become the focal point of the room. You can also use a frieze of paper on top or bottom of the wall to create a more subtle effect design.

Cast

If you like the look of textured walls, plaster finish is an attractive option for your bedroom. In general, you can stain or glaze before applying plaster, so you can customize it with a color that matches the decor of the room. Often the plaster on the walls with a semicircular motion is used, but you can apply with a trowel making the design you prefer. The application process is more intense than that of traditional painting, but is ideal for covering walls that are damaged as you can hide many surface defects finish.

Wooden panels

For a rustic room with wood panels they are ideal. The wood-paneled headboards are an attractive option, but you can get flat or embossed sheets made with wood panels. Before installing you can paint or stain them to customize the look of the material. As with the wallpaper, you can apply one or two panels on walls to create visual interest or create a main wall. You can also use only panels at the bottom of the wall and give them termination moldings.

The cabinets of the kitchen can be the pride or shame for it, serving as point of reference or ruining the decor. The problem with changing the kitchen cabinets is to invest in a game completely new that can be very expensive. Before aviates towel on the design of your kitchen, consider some budget options to update kitchen cabinets.

Instructions

1. Clean your cabinet inside and out. Start with a shaker to remove cobwebs and dust. Then use mild soap and warm water with a sponge to wash the inside of the cabinets. Choose an appropriate cleaner for the exterior finish of the cabinet doors. If open shelves have a layer of fat dirt, you can use a solution of vinegar and water to remove it.
2. Consider your options on the decorated door of your kitchen cabinet. If you find the general style wrong for your kitchen cabinets reorient, a process that is usually less expensive than investing in new ones. You can also remove some or all cabinet doors to open shelves, a popular choice in modern and contemporary kitchens. If you find your cabinets very simple, you can add wood trim to the edges of the doors with craft glue and paint over them. If you like the style of the door but not the color, consider adding a fresh coat of paint to update. White or off-white makes a Scandinavian minimalism, while yellow or violet blue has a rustic charm. The gray stone evokes feelings of rustic Tuscan cuisine, and warm terracotta has a Mexican colonial vibe.
3. Choose from different decorations and finishes. If you have open shelves paint them and add strips of wallpaper in the back of the shelves, creating a bright and graphic appearance. If your cabinets have doors, you can decorate them below or wallpaper with tile backsplash to create the same effect.
4. Change equipment cabinets. You can customize your kitchen and update the style investing in new handles for drawers or handles to the cabinets. Go for elegant styles in chrome or stainless steel for a contemporary edge, or invest in artisan pieces for a bohemian, modern look. You can sift through yard sales, markets, shops or auction to find vintage equipment for cabinets to give your kitchen a fun style.
5. Place good accessories in your cabinets. Fill your shelves with colorful or vintage dishes. Align the top of the cabinets with wine bottles hanging hooks or the bottom of the cabinets to hang pots or utensils.

Tips & Warnings

• Stencils, stickers, wall and wallpaper provide other fast options to fix common kitchen cabinets.
• If you are tempted to paint completely, high quality wood cabinets, see other options before, because if you do you can lower the value of the sale of the house.

Decorating the rooms in your home allows you to take control over the look and feel of each room. Decorating an old room of bath allows you to mix and match different colors, patterns and textures to make the old bathroom look new again. From the shabby chic to a modern or conservative style, the decorating scheme you choose is entirely in your hands.

Instructions

1. Choose a color scheme you want to incorporate into the old bathroom. This will make you choose decorative objects easier, because you can coordinate with the colors you’ve chosen. You can combine the old bathroom with the rest of the decor of your home or be more daring and creative with rich, vivid colors.
2. Choose basic objects of any bathroom as towels, rags, blankets for the toilet and shower curtain. Make essential items combined with the color scheme you choose.
3. Hang towels and rags near the shower or bathtub in old bathroom to serve as objects of decoration helpful.
4. Choose a small rug to put beside the tub or shower old bathroom. Not only wills the carpet to dry your feet after showering, it also adds a decorative touch to the environment.
5. Choose any kind of art for the wall to highlight the color scheme of your old bathroom. The art for the bathroom can be almost anything you choose, as shots of a beach, floral paintings or inspire actives plates.
6. Candy has varied around the bathroom to draw attention to decorative objects. Candles, small statues and potted plants give attractive qualities to a monotonous and old bathroom.

Tips & Warnings

• Look for interior decorating magazines and websites for more ideas about the style you want to get for your old bathroom.
• Thrift shops and yard sales usually have objects that can be used to decorate your bathroom and the rest of your home without spending much money.

Since the problems of poor lighting to overcrowding, the quarter- bath children can be a challenge to decorate. Decorate a small bathroom need not be an expensive task. Special touches in the right places can transform an old, worn bath into one that looks newly remodeled. Think about color, and pay attention to detail for the best ideas for decorating and open your small bathroom.

Instructions

1. Paint a layer of color on the walls. Paint is an inexpensive way to brighten up your bathroom almost instantly. Choose colors that suit your color scheme and go with any shade you like. Semi-gloss paints are pleasant to the walls of the bathroom because they are durable, have a good shine and are easy to clean.
2. Add a border to the top of the room to create a feeling of space. You can also paint a trellis or other design around the edge of the wall on the roof to expand this area and that the room is enlarged.
3. Replaces accessories cabinets, walls or furniture in your bathroom for a touch of fast and economical design. Keep accessories with the theme of the bathroom.
4. Add a shelf to the wall. These units are inexpensive and can be adjusted to fit the width of the wall you want to decorate. Above the commode it is a convenient place for these parts. Place the shelves to the ceiling to make the most use of the space. Stack storage containers for bathroom items on the shelves.
5. Use a mirror to create the illusion of a larger space. It need not be an expensive and ornate mirror. Something simple with beveled edges works well to open space.
6. Hang a transparent curtain. Shower curtains with dark colors and designs block the light in the bathroom. Transparent allow light to pass through the curtain and make the room seem larger. Add a special style hanging curtain with a tape, rope or something you already have in your home.
7. Choose a soft light for your bathroom. The natural is better, but the main thing is to avoid the blinding white light into a small area.
8. Go for a minimalist approach with accessories. Too small accessories make a room more crowded than it is seems. Use a decorative piece in the bathroom with towels and a rug and keeps the wall art to a minimum.

Tips & Warnings

• Shop at the flea market and garage sales before going to the store.

You work hard to keep your home clean and the shower bathroom is no exception. But if it seems that no matter how diligent you are with the routine cleaning of your bathroom, the horrible spots reappear in the grout between the tiles. Use the proper tools and cleaning products to get rid of the stains and then apply preventive measures is all you need to keep the grout and the tiles of the shower sparkling clean and free of mold and mildew.

Instructions

1. Remove the layer formed by soap residue on tiles and grout with white distilled vinegar. Fill the spray bottle with this product and soaks such surfaces. Let sit for 15 minutes and reapply. Use a scrub brush to scrub the tiles. An old toothbrush is ideal for cleaning grout. Rinse well with cold water and dry with soft cloth.
2.  Apply lemon juice to all areas of the grout requiring extra attention. Soak a cotton swab or a cotton ball moistened with the juice and the area. Allow standing for 5 minutes and rubs the soft bristle brush to loosen and remove stains. Rinse all residue and dry well.
3. Apply a coat of car wax to clean and dry tiles. This will seal the same and the slurry thus also repelling water. Allow the wax to dry and bright polish it until following the product instructions.
4. Daily clean the tiles with a cloth after showering or bathing to keep them shiny and free of stains or soap scum buildup. Reapply wax once or twice a year.

The ceramic or porcelain is typically separated by grout lines that hold the tile in place. It is supported with small rubber points located on the ends of the tiles, providing even spacing there between. The slurry is then placed between these spaces, locking them in place once it has dried. Excess grout needs to be cleaned from the surface of the tile with clean rags while still wet. If the grout is not cleaned, it hardens and becomes difficult to remove.

Instructions

1. Pour water in the slurry and begins scraping the piece of wood. Add a little more water as you go scraping. Remove the grout larger deposits as you can with the piece of wood.
2. Clean the area with a clean cloth, removing the larger pieces of loose grout.
3. Pour water into the remaining slurry and the nylon cleaning pad.
4. Rub small pieces of grout left in the tile. Continue pouring water on the grout as you rub.
5. Rinse the tile with water and dry with a soft clean cloth.
6. Continued rubbing with nylon brush and water slurry even if it shows. Dry the area when you’re done.

Tips & Warnings

• Do not allow grout to harden on the tile long since removal become more difficult.
• Do not use metal objects such as sharp knives to remove the grout as you can scratch the surface of the tile.

Although cleaning a carpet with shampoo for long hair in home can be more complicated than a regular wash, it is not very difficult. You can use items from home to do regular work. However, if you have a carpet silk based or wool, you need to take it to a dry cleaner because you cannot wash with shampoo safely.

Instructions

1. Clean the carpet with a vacuum using the upholstery tool. Most medium hair carpets and heavy obstruct the regular vacuum cleaners, so it’s important to use the upholstery tool to protect the life of your vacuum cleaner.
2. Sprinkle the carpet with water and then spread a uniform quantity of bleaching powder. Use a clean towel to rub it. You should see no foam, but the dust must “disappear” while restrings.
3. Use a steam cleaner to remove the bleach solution powder. Each steam cleaner is different, so check the operations manual for more information, if you’ve never used one before. Be sure to spend the steam cleaner on the carpet completely and all edges and corners are cleaned. Also be sure to change the water in the steam cleaner (again, check the manufacturer’s specifications for manual) often if you see the dirty water returns through the hose from the tank.
4. Fold the carpet on the grid Laundry in a warm, moisture-free. Outdoor is the best option, but if that is not possible, a bathroom with a dehumidifier also works well. Do not place the carpet on the floor until it is completely dry to the touch.